Description

The IS200VCMIH1B is a PCB component for the Mark VI system.The Mark VI is one of several systems for gas/steam turbine management that was created and distributed by GE under the Speedtronic” name. The IS200VCMIH1B is designed with a narrow front faceplate. This faceplate includes openings for many components, including (from top to bottom) three LED indicators, a reset switch, a serial port connector,eight LED indicators labeled module,” six LED indicators labeled R/S/T,” three LED indicators, and a DIN connector. These components are wired in to the surface of the circuit board. The IS200VCMIH1B has two backplane connectors located along its back edge.The board has a vertical pin connector located near the front faceplate, as well as a male vertical pin ribbon connector, also located near the front faceplate.The board has a transformer located behind the DIN connector that is mounted into the front faceplate. The IS200VCMIH1B includes many resistors, capacitors, and diodes.It has multiple integrated circuits on its surface. The IS200VCMIH1B is mounted in slot one of the central Control Module. This card is used for internal communications between I/O cards contained within the card rack or within expansion I/O interface modules.It also allows for communication to I/O in Protection modules, I/O in other Control Modules (in triple redundant configurations,) and communications within the main processor card. The IS200VCMIH1B is marked with the codes FA/00 and 94V-0.It has the manufacturer logo and the board number printed on the board surface.