Description

The IS200TRESH1A is a type of printed circuit board or PCB. This board is what is called an emergency trip termination board. The IS200TRESH1A is a component in the Mark VI series by General Electric or GE. The Mark VI is the most recent series in the Mark line which was created for the management of gas and steam turbines. Sitting along the left edge of the IS200TRESH1A, there are two (2) long black terminal blocks. These have been placed vertically on the PCB's edge. Both of the terminal blocks contain enough spaces to house twenty-four (24) silver metal terminals each adding up to forty-eight (48) terminals. Every space is labeled with the numbers one (1) through forty-eight (48) in total. The opposite edge of the IS200TRESH1A contains at least four (4) black connector ports which are mounted onto silver metal. Several red components which are called MOVs or metal oxide varistors are arranged in a line on the left of the IS200TRESH1A as well as at the top. Three (3) square devices which are called relays or contactors. Each relays has been covered in transparent plastic. On the top of each of these devices is white writing which contains information about the product. Close to the bottom of the IS200TRESH1A, there are two (2) small white wires which are attached to the board on both ends. Right above these wires is a series of very small resistors containing bands that are blue and white. A few very small capacitors are placed among these resistors.