Description

The IS200JPDCG1A is a Mark VI component created by GE.The Mark VI is part of the Speedtronic line of gas and steam turbine management that began with the Mark I in the 1960s.The MKVI is powered by a 125 VDC battery system. It can also be powered by a 120/240 VAC source rectified to 125 VDC via a power converter. The IS200JPDCG1A is a long rectangular board with a large number of components. This board may be mounted to a sub-panel via six standoffs and screws connected through factory-made holes located along the edges of the board. This sub-panel adds several connectors to the board, which are accessed through multiple openings located on one side of the board. On the opposite side of the board has a small cutout next to a female connector; this allows for the connection of a large vertical component that wires into the board using a two-position plug connected by surface wiring. The IS200JPDCG1A is built with three small terminal boards with three positions each.It also has one larger terminal strip that has five positions. The board has seven toggle switches.This includes one toggle switch placed on its own, three toggle switches placed side-by-side, and three toggle switches placed side-by-side under the warning: Caution: After removing power wait 30 sec before re-energizing.” The IS200JPDCG1A has two stab-on connectors, two LEDs, and a single male vertical ribbon connector.The board has twenty fuses, including three sets of six and two fuses that are placed separately. The board has twenty-six 2-position plugs, eighteen 3-position plugs, two 4-position plugs,three 9-position plugs, and a single 12-,5-, and 6-position plug. Other components on the board include transistors, a transformer, a jumper switch, twenty-six varistors, as well as resistors, capacitors, and integrated circuits.