DS3810MMAB1
GE DRIVE SYSTEMS SPEEDTRONIC CIR. BD DS3810MMAB1
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3810MMAB1
GE DRIVE SYSTEMS SPEEDTRONIC CIR. BD DS3810MMAB1
- 4.50 (2)
- Click a star to rate this product
Availability:
In Stock Ships In 3-5 Days
Description
The DS3810MMAB1 is a PCB component created by GE for the Mark IV series. This series, which is designed to manage gas and steam turbines, uses multiple microcomputers to distribute control functions of the turbine across several platforms. These continuously running backups monitor the performance of the turbine system and keep it running even if one system experiences an electronics issue. The MKIV is built with an improved operator interface with better application flexibility and experiences a decreased turbine outage rate when compared to GE’s earlier Speedtronic systems.
The DS3810MMAB1 has four small auxiliary boards mounted to its surface. These boards, which are marked either 304A8483G9 or 304A8483G5, connect to the primary board by thirteen board-to-board pins. Each of these auxiliary boards sits within a marked-off area on the motherboard labeled a ‘quad.’ There is are Quads A/B/C/D. Each quad also includes six jumper switches and one resistor network array.
The DS3810MMAB1 has twenty-six jumpers (including those mentioned above.) There are nine resistor network arrays on the board. Resistor networks arrays are sometimes used for voltage division. The board is built with one toggle switch and one red LED. It is also important to mention the Jumper/hex base chart placed at the bottom of the board which gives information on jumper position.
The DS3810MMAB1 has one 218A4553-1 A/mp 533002-1 mating connector. This connector is designed to allow the DS3810MMAB1 to communicate with other PCBs.
The DS3810MMAB1 is built with thirty-nine integrated circuits, including electrically erasable PROMs, octal buffers, and oscillating chips.
GE provided all technical support for the DS3810MMAB1, including publications like manuals and data sheets.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.