DS3800NSWA1
GENERAL ELECTRIC GAS TURBINE SWS COMPARTOR BOARD DS3800NSWA1
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800NSWA1
GENERAL ELECTRIC GAS TURBINE SWS COMPARTOR BOARD DS3800NSWA1
- 5.00 (2)
- Click a star to rate this product
Availability:
In Stock Ships Today
Description
The DS3800NSWA1 is a PCB designed by GE for the Mark IV (Speedtronic) series. This series was created for the management of steam/gas turbines and is built with triple redundant back-ups on all critical controls/protection parameters to limit downtime caused by electronics failure.
The DS3800NSWA1 is made to accept an optional daughter board. This extra auxiliary, DS3800DSWA, communicates with DS3800NSWA1 by way of a ribbon cable that connects to a vertical pin (male) connector located toward the center of the primary board. This connector is marked “DA” and labeled 218A4807P4. If installed, the optional auxiliary board gives the DS3800NSWA1 access to twelve extra jumper switches and twelve rotary potentiometers. The DS3800NSWA1 also has a 218A4653-1 A/mp 102041-1 PCB mating connector populating its left edge. The board surface is marked from ten to eighty by tens directly behind this connector.
The DS3800NSWA1 has two ejector clips installed, in the right-hand corners. Made of nylon, these extractors mount to the board and act as either a lever or as a handle so the technician doesn’t have to touch circuitry and components as they are installing or extracting the board. The DS3800NSWA1 is marked with the codes 6DA02 and 6BA02. It is factory drilled.
The DS3800NSWA1 is built with twelve TP test points and twelve light emitting diodes (red.) All of these components are marked. The board also has six resistor networks. Resistor networks may be used for voltage division.
The DS3800NSWA1 has twelve circuits.This includes octal buffers and line drivers with 3-state outputs which give a choice of selected combinations of inverting and noninverting outputs, and quad differential comparators that can operate from a single power supply over a wide range of voltages.
All tech support for the DS3800NSWA1, including manuals and datasheets, was the responsibility of GE.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.