Description

The DS3800NPSR1B1B was created by General Electric (GE). This product is a printed circuit board (PCB). The DS3800NPSR1B1B was designed to be a part of the Speedtronic Mark IV system. The Mark IV series has been relied on for turbine automation and control for decades.

Two (2) square black semiconductors are prominently displayed on the DS3800NPSR1B1B. A white label is featured on the top of both of the semiconductors. The part name F28S05/1000Z is written on each label with black print. Two mid-sized blue capacitors are located right above the semiconductors. Each capacitor is marked with the initial C, as C12 and C2. Below the two semiconductors there are two (2) small yellow capacitors. These capacitors are labeled C13 and C3. Two bigger yellow capacitors are placed under the small capacitors. A long black connector port spans the lower edge of the DS3800NPSR1B1B. The numbers ten through eighty are marked along the port by tens. Two (2) smaller capacitors which are yellow in color are seen above the two blue capacitors. These capacitors are marked with the labels C14 and C4. On the top part of the DS3800NPSR1B1B are several other small circuit components. Also sitting on the top part of the DS3800NPSR1B1B are 13 small capacitors which are yellow. Fifteen small resistors which are covered in different colored bands are placed among the capacitors. These resistors and capacitors are aligned in three vertical rows. The DS3800NPSR1B1B has two integrated circuits which can be seen on the upper part of the circuit board.