Description

The DS3800NPRB1 was made by General Electric (GE). This component is a printed circuit board. The board was created to be a part of the Speedtronic Mark IV series of turbine controls. The DS3800NPRB1 is a proximitor interface circuit board.

Spanning the length of the DS3800NPRB1 circuit board is a long black connector port. Placed on the other end of the circuit board is a smaller blue connector port. The port’s part number, 218A4637-P3, is written on the top of the component. The 218A4637-P3 is a male connector port. Lined up on the right edge of the DS3800NPRB1 are ten (10) test points. Each test point is designated with the initials TP, from TP0 through TP9. A cubic black converter is located on the DS3800NPRB1. The voltage of this converter, 12VDC (12 volts DC) is written on the top of the part along with the part number. There are twenty-seven (27) integrated circuits located on the DS3800NPRB1 printed circuit board. The integrated circuits vary in size. The part number JM318AC LM348N is written on top of the mid-sized integrated circuits. The part number H13-507-5 L0131ACME is written on the largest integrated capacitor. Positioned near the lower left corner of the DS3800NPRB1 is a yellow resistor network. The resistance of the resistor network is equivalent to the total sum of all of the resistors contained inside. Many capacitors in various sizes are placed on the DS3800NPRB1. Some of these capacitors are round and are found in various colors like white, blue, and yellow. Several pink rectangular capacitors can also be found on the DS3800NPRB1.