DS3800NPOC1
GENERAL ELECTRIC GAS TURBINE SEL POSITION D CIRCUIT BOARD DS3800
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800NPOC1
GENERAL ELECTRIC GAS TURBINE SEL POSITION D CIRCUIT BOARD DS3800
- 5.00 (1)
- Click a star to rate this product
Availability: Call for Availability
Description
The DS3800NPOC1 printed circuit board was made by General Electric. This board is a generator regulator card. The DS3800NPOC1 is a component of the Speedtronic Mark IV series which was made to control gas and steam turbines.
The DS3800NPOC1 contains seventeen (17) integrated circuits labeled with their respective part numbers on one side of the circuit board. There are three additional integrated circuits on the other side of the board. On the right half of the circuit board there are three (3) additional integrated circuits. Near the bottom right corner of the DS3800NPOC1 there is one (1) switch which is red and silver. Using this switch the current can be interrupted or diverted from one conductor to another. A large rectangle-shaped black signal conditioner is located near the middle of the DS3800NPOC1. A signal conditioner is a component which can convert an electric signal into a different type of electric signal. The device’s model number CS2603 is written on the top of the signal conditioner. A large square converter is adjacent to the signal conditioner. The model number M5000 is written on the top of the converter. Ten (10) red light emitting diodes, or LEDs, are located on the right side of the DS3800NPOC1. Two (2) orange LEDs are placed next to the red diodes. One (1) round metal oxide varistor which is red in color is seen between the converter and the signal conditioner.
The DS3800NPOC1 is shipped in an anti-static bag protecting the user from static shock resulting from static accumulating during shipping.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.