DS3800NOTA1
DS3800NOTA1 GENERAL ELECTRIC OVER-TEMPERATURE BOARD
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800NOTA1
DS3800NOTA1 GENERAL ELECTRIC OVER-TEMPERATURE BOARD
- 5.00 (2)
- Click a star to rate this product
Availability: Call for Availability
Description
The DS3800NOTA1 is a PCB component manufactured by General Electric for their gas/steam turbine management system, the Mark IV. The MKIV was General Electric’s third widely available Speedtronic system, and the first to use integrated microcomputers to protect the turbine system from issues like fire, high pressure, and vibration. These microcomputers can also automate things like the turbine’s start-up and shut-down procedures.
The DS3800NOTA1 has been alignment marked with letters (A through J) and numbers (one through five) along two edges. It has been factory drilled at each corner.
The DS3800NOTA1 has nineteen circuits and sixteen trim potentiometers spread around the surface of the board.Potentiometers are used for adjustment, calibration, and tuning of circuits. The board has two Augat connectors (female) and one vertical pin male mating connector. There is a terminal strip with six screw mounts on one edge. Terminal blocks and strips allow more than one circuit to be tied together by clamping wires down using the screw connections.
The board is built with polyester vinyl capacitors as well as capacitors of other materials. Resistors can be metal film or carbon composite. There are several test points located on the board. The DS3800NOTA1 will ship to you protected by a static-reducing sleeve or covering. Technical support was originally provided by GE.
TurbineIndustrial can help you maintain the longevity and health of your Speedtronic system through our warranty, service, and exchange programs, as well as through our wide selection of GE parts. Please call or email us today if you have any questions about our sales or service capacities.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.