DS3800NHVE
GENERAL ELECTRIC HIGH HORSE POWER HIGH VOLTAGE BOARD DS3800NHVE
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800NHVE
GENERAL ELECTRIC HIGH HORSE POWER HIGH VOLTAGE BOARD DS3800NHVE
- 5.00 (2)
- Click a star to rate this product
Availability:
In Stock Ships Today
Description
The DS3800NHVE by GE is a PCB from their Mark IV line. The Mark IV was created for gas/steam turbine control, and can be utilized for water, fuel or air emissions monitoring. It can also automate shutdown and startup procedures for more efficient management.
The DS3800NHVE functions as a high voltage card. It is double-drilled in every corner and has been marked for alignment (A-J, 10-80) on two edges. It is also marked 6DA01 and 6BA01.
The DS3800NHVE has two multipin communication connectors for communicating with other PCBs. These are attached to the left edge. The other three edges of the board are taken up by header connectors. The top edge has three eight-position headers with three pins each. These are marked P1, P2, and P3. The right edge has five four-position headers with two pins each. These are marked 01, 02, 03, P and N. The lower edge has three eight-position headers with three pins each. These are marked N1, N2, and N3.
The DS3800NHVE is built with five jumper switches, six round transformers, six LEDs (red,) and six contact points. Jumpers can be set to either "H" or to "B."
The DS3800NHVE uses capacitors of varying size, but including six 100V 2.0 +/- 10% 708A1. Resistors are both metal film (ceramic covered) and carbon composite.
Technical support for the DS3800NHVE(including publications like datasheets and manuals) was provided to users by General Electric. These publications are useful resources for information on part specs, installation instructions, and maintenance guidelines.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.