DS3800HVDB1
GE DRIVE SYSTEMS VIDEO DRIVER CONTROL BOARD DS3800HVDB1
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800HVDB1
GE DRIVE SYSTEMS VIDEO DRIVER CONTROL BOARD DS3800HVDB1
- 3.50 (2)
- Click a star to rate this product
Availability:
In Stock Ships In 3-5 Days
Description
The GE Video Driver Board DS3800HVDB1 is designed for quick installation in the drive. The board features a modular connector on 1 end and retention levers on the other end. The GE Video Driver Board DS3800HVDB1 also is populated with 1 20-pin connector between the retention levers. The board is also populated with multiple electrically erasable programmable read-only memory (EEPROM) modules and 15 jumpers.
Firmware and programming code is subject to revision due to the incorporation of fixes, updates, and improvements. For that reason, it is best practice to use the most recent code in the drive. If you must call for service, often the most current software update can resolve some issues. The GE Video Driver Board DS3800HVDB1 enables you to easily apply the latest code to the EEPROM modules. This is because the EEPROMs are able to be updated while the modules are installed in the board. The code can be erased and overwritten.
The jumpers are one way for a technician to configure the board for use in the drive. When the original board arrives from the manufacturer, the jumpers are positioned in the default settings. These are the most commonly used jumper positions. However, all the jumper positions are described in the printed information supplied with the board. Before the board is installed, the jumper positions are documented and saved with the other important information related to the board. Set the jumpers on the new board to match the positions on the board you are replacing.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.