DS3800HSCD1
DS3800HSCD1 GE DRIVE SYSTEMS INPUT MODULE
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800HSCD1
DS3800HSCD1 GE DRIVE SYSTEMS INPUT MODULE
- 5.00 (2)
- Click a star to rate this product
Availability:
In Stock Ships Today
Description
The GE High Level Non-Isolated Input Board DS3800HSCD1 features a modular connector on 1 end and retention levers on the other end. The board is populated with a multiple capacitors. The board is populated with multiple transistor-transistor logic devices. The GE High Level Non-Isolated Input Board DS3800HSCD1 is also populated with 16 red indicator LEDs and 1 amber indicator LED. The board also has 1 socket for electrically erasable programmable read-only memory (EEPROM) modules. The board is also populated with 3 trimmer resistors.
When the amber LED is on, the GE High Level Non-Isolated Input Board DS3800HSCD1 is experiencing a condition that produces a warning. To clear the warning and make the amber LED turn off, the first troubleshooting step is to stop all control signals and all processing and reset the board. First, remove all sources of power from the drive to make all the boards in the interior of the drive safe to touch. Lift up on the retention levers and lift up on the board so that it is partially removed from the board rack. Wait 30 seconds and slide the board back into the rack and close the retention levers. Apply current to the drive and wait for processing to restart. The reset synchronizes the control signals and starts proper processing. If the amber LED is off, the waring has cleared. If the red LEDs are flashing, processing has restarted.
If the warning persists, use the diagnostic tools to further investigate the condition.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.