Description

The DS3800HRDB1D1D is a driver panel that featured in the Mark IV Speedtronic Turbine line fabricated by GE (General Electric). The DS3800HRDB1D1D has a border branded A, B, C, D, E, F, F, G, H. For a simple installation to the system just uses the attached clips and a few anchors. There are eight beige diodes. There are sixteen ginger diodes and six dark diodes. There are three sets of metallic sticks every one with concealment. There are three little black quadrilateral transistors, three black round transistors, and one bigger shiny transistor. Transistors are used to intensify electrical powers and electronic signals. Each transistor has three points of contact that fasten it to the circuit board, whereas many other components have two connectors. The DS3800HRDB1D1D has a big feminine port on a short edge of the board. On the other short edge are two masculine stations with pale blue casings that have two fasteners on each. The DS3800HRDB1D1D has a mixture of over twenty EEPROM and EPROM. They both hold codes for the DS3800HRDB1D1D , nevertheless, if the software design needs to be changed it is completed within the EPROM. The DS3800HRDB1D1D has six beige capacitors. The DS3800HRDB1D1D has more than two-hundred small resistors and two bigger resistors. Each resistor has its own current capability which is discernably indicated on the outside. Each separate component is branded with its own character and numeral combination.

TurbineIndustrial has a varied collection of automation merchandise along with a well-informed and approachable staff. Call TurbineIndustrial for all your requirements.