Description

The DS3800HPBD1 is part of the Mark IV Speedtronic series by General Electric (GE). The DS3800HPBD1 has a series of Jumper ports. These Jumper ports can alter how energy flows around the board with small plastic covers that can be moved between the ports. There is a small red square towards the corner of the board which houses a small switch. There are two LED lights on one edge. The DS3800HPBD1 has around fifty resistors. Each resistor can only withstand a certain amount of energy. This can be figured out by the number and color of the bands on each one. The DS3800HPBD1 also has a few large grey diodes, a single sky-blue diode, and around fifty aqua colored diodes. There are a few wires connecting some diodes at the bottom to diodes near the top. The DS3800HPBD1 features around twenty EPROMs. The EPROMs store the programming and have the ability to be changed/re-programmed. The DS3800HPBD1 also has twelve EEPROM which is just like the EPROM in its purpose. However, EEPROM cannot be changed or re-programmed. The DS3800HPBD1also has a space for an additional EEPROM or EPROM to be placed. The area is labeled "SPARE". Around that section is silver tabs so the device can be installed. The DS3800HPBD1 also has two light grey clips and a large connection terminal for quick connection to the rest of the Mark IV system. Each part of the DS3800HPBD1 has an alphanumeric identification code. The DS3800HPBD1 part number is also on the board with General Electric's (GE) company seal.

Please call TurbineIndustrial for pricing.