DS3800HMPG1G1D
GENERAL ELECTRIC TERMINAL UNIT DS3800HMPG1G1D
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800HMPG1G1D
GENERAL ELECTRIC TERMINAL UNIT DS3800HMPG1G1D
- 4.00 (2)
- Click a star to rate this product
Availability:
In Stock Ships Today
Description
The GE Network Controller Board DS3800HMPG1G1D is designed for quick installation in the drive. The board features a modular connector on 1 end and retention levers on the other end. The GE Network Controller Board DS3800HMPG1G1D also is populated with 2 red indicator LEDs and 1 amber LED which are visible from the front of the board. The board also is populated with a microprocessor, erasable programmable read-only memory (EPROM) modules, and a 34-pin connector.
If you determine that the GE Network Controller Board DS3800HMPG1G1D must be replaced, the procedure can be performed quickly due to the fact that the board is equipped with retention levers and modular connectors. However, you must first remove any ribbon cables connected to the board. Use 1 hand to hold the connector on the end of the cable and pull it out of the connector on the board. Notice how the ribbon cable is routed inside the drive before you remove it. When you install the replacement board, route the cable so that cool air is able to flow through the drive and carry away the heat from the components. Special consideration must be applied to the microprocessor to make sure it does not over heat.
When the board is removed from the drive, remove the EPROM module from the defective board and install it in the replacement board. The modules are connected to a socket and are removed by gently prying off the module. The modules snap into the empty socket on the replacement board.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.