DS3800HLCA1C1D
DS3800HLCA1C1D GE DRIVE SYSTEMS MARK 4 CONTROL CARD
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800HLCA1C1D
DS3800HLCA1C1D GE DRIVE SYSTEMS MARK 4 CONTROL CARD
- 5.00 (1)
- Click a star to rate this product
Availability:
In Stock Ships In 3-5 Days
Description
General Electric developed the DS3800HLCA1C1D printed circuit board as a working piece of its Mark IV Speedtronic gas and steam turbine control system. This system uses integrated chipsets built with intentional redundancies that allow boards to automatically take control over another's responsibilities if a technical issue arises. In this way, downtime is minimized.
The DS3800HLCA1C1D, which functions as an I/O Control board, has the following specifications:
-
has one red LED marked "test."
-
has four potentiometers, labeled HGN, HOS, LGN, and OS. These are positioned on the right side of the board.
-
has two toggles. The 'test' switch is marked A4627P5 C & K 0.4 VA max. This switch has three right-angled prongs. The 'reset' switch is marked A4627PII C & K 0.4 VA max. This switch has six right-angled prongs.
-
twelve individually labeled TP test points
-
three jumpers. Jumper switches allow for different configurations of the board by changing the position of the jumper switch.
-
has one A-mp connector (218A4553-1) located on the left side of the board. This is numbered from 2 to 80 behind the component, by tens.
-
has multiple markings on the board edge, including alignment (A-J) on the top, and the codes 6BA0 and 6DA03, near the bottom.
-
has over 35 integrated circuits, including two programmable Intel interfaces located in the center of the board.
Technical support for the DS3800HLCA1C1D and other Mark IV components was originally provided by GE. Manuals and data sheets published by the manufacturer include detailed instructions for proper installation and safety procedures.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.