DS3800HITA
GENERAL ELECTRIC SPEEDTRONIC DRIVE SYSTEMS DS3800HITA
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800HITA
GENERAL ELECTRIC SPEEDTRONIC DRIVE SYSTEMS DS3800HITA
- 4.50 (2)
- Click a star to rate this product
Availability:
In Stock Ships In 3-5 Days
Description
The DS3800HITA from GE is a printed circuit board created as part of their Speedtronic Mark IV gas and steam turbine control series. With intentional redundancies built between integrated chipsets, the Mark IV is designed to limit downtime due to electronics failure. The DS3800HITA is used specifically as an I/O (Input/Output) control board, with the following specs:
-
has been factory-drilled in each corner of the board.
-
the top edge of the board is labeled A/B/C/D/E/F/G/H/I/J. Triangles are set between each letter to help with alignment.
-
AMP connector (218A4553-1 AMP 533002-1 8442) populates the left edge of the board.
-
has been marked on its bottom edge 6BA06 and 6DA03.
-
has nine LEDs--eight red (0-7) and one amber (Imok)
-
has fifteen test points (1-7,ox, va, vb, vc, out 0, out 1, out 2, dcom)
-
has seven jumper switches. Five sit between the choices A or B. Jumper number six sits between short and long. Jumper number seven sits between on and off.
-
has four resistor networks
DS3800HITA is designed with small capacitors located all around the board. It has thirty-four integrated circuits, including Eproms, oscillators, and DIP components. The DS3800HITA is designed with metal film resistors.
GE provided tech support for the DS3800HITA, including original datasheets and manuals. Please refer to these publications for best practices in the maintenance and installation of this and other Mark IV components.
Turbine Industrial's sales team can help you via email or phone with your automation needs. Please don't hesitate to contact us if you have questions about the DS3800HITA or our other products and services.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.