DS3800DMEC1C1C
DS3800DMEC1B1B GE DRIVE GAS GENERATOR CONTROL
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800DMEC1C1C
DS3800DMEC1B1B GE DRIVE GAS GENERATOR CONTROL
- 5.00 (2)
- Click a star to rate this product
Availability:
In Stock Ships In 3-5 Days
Description
The GE MD Exciter Control Board DS3800DMEC1C1C features 7 terminals for attaching additional components to the board, and 2 indicator LEDs. The GE MD Exciter Control Board DS3800DMEC1C1C also is populated with 14 trimmer resistors, 20 jumpers, 1 20-pin ribbon cable, and 1 34-pin ribbon cable.
The reset button is a valuable tool to use if the board appears to experience intermittent problems or has suddenly developed processing errors. Once the reset button is pressed, the board restarts without having to lose power and perform a cold start. If some signals have become garbled or interfered with, the restart will enable the signals to clear. Because the board must be installed in the drive and the board will be exposed to full power, only a qualified individual should press the restart button. This is because of the risk of electric shock if you touch a component while power is applied to the drive. Another risk is electric burn or other serious injury.
If the reset button doesn’t resolve the issue, another method of pinpointing the problem is to test the board using the test points. The test points are used when the board is removed from the drive and all power is removed. A qualified person will have on hand a testing device that is configured for performing the type of testing you want to perform.
Another source of information when you troubleshoot the board is to view the 2 LEDs on the board. The red LEDs are lit when activity is occurring on the board.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.