DS3800DGPA1
SPEEDTRONIC GE DRIVE SYSTEMS CARD DS3800DGPA1
Contact
Us!
Warranty: 3 Year Warranty
Manuals & Datasheets: Request via Email
DS3800DGPA1
SPEEDTRONIC GE DRIVE SYSTEMS CARD DS3800DGPA1
Availability:
In Stock Ships Today
Description
DS3800DGPA1 is a circuit board for a turbine of a gas generator made by GE for the Speedtronic series of controls. The circuit board was made as part of the Mark IV turbine control system by Speedtronic. The DS3800DGPA1 is a daughter card, which is a smaller circuit board which attaches to a large board which extends the circuits of the large circuit board. The large circuit board could be either the motherboard, or it may be attached to a larger secondary board.
The green rectangle-shaped circuit board has 3 slots for medium-sized capacitors which are termed C1 through C3. The board has 26 small golden square capacitors. On the DS3800DGPA1 board are 6 blue and grey-colored resistors termed RI through R6 on one of the edges of the circuit board. The circuit board has 10 open slots for small resistors termed R12 through R21. This circuit card also has 29 gold jumper pins which are termed as 1 through 29 on the opposite edge of the circuit board. These jumper pins let the operator change the card to adjust its functions when necessary. DCPA 6DA02 is written along one edge of the circuit board. Also written on the card along the side of the board is its number, DS3800DGPA1 6BA02.
TurbineIndustrial will send the DS3800DGPA1 circuit board in a bag which dissipates any energy accumulated while shipping to ensure the safety of the user. Any technical support for the DS3800DGPA1 board must be provided by GE, the original manufacturer.
Purchase
Please give us a call or send us an email for pricing on New Surplus and Reconditioned replacements that we have in our inventory. Our lead times are short, stock is excellent, and pricing is competitive. We hope to be your go-to supplier for all GE Turbine replacement boards and controls.
Exchange
We conveniently offer an exchange program that allows you to recycle your old board and receive an up-front discount on a replacement. Please ask about our exchange credit program if you have a defective board to exchange with the purchase of a new or reconditioned replacement. We ask that the defective board is sent in within 30 days of the purchase.
Repair
We offer repair on most GE Turbine boards we sell. Although we usually have replacements available, we recognize that customers may prefer to have their board repaired. Our repair program allows us to offer a lower cost alternative to replacement.