Description

The DS3820AISA1 is part of the Speedtronic Mark IV line manufactured by General Electric.The DS3820AISA1 is a smaller circuit board. The DS3820AISA1 has four light blue resistors with up to five colored rings to indicate how much energy was resistor can restrict at any time. The DS3820AISA1 has four sets of pins called Jumper Ports. Jumper Ports come with small plastic sleeves to cover the pins. By covering the Jumper Ports the worker can control and direct which way the energy flows through the circuit board. The DS3820AISA1 sixteen large bright orange diodes, and eight small teal diodes. Didoes are used to direct energy to flow in a single direction. The DS3820AISA1 has a black plastic terminal with twelve flat screw ports. In front of the black plastic terminal is a small metal terminal with another twelve flat screw ports. The DS3820AISA1 also has a small section in the open space of the circuit board where additional parts could be added like an EPROM, EEPROM, additional diodes, capacitors, resistors, etc. There are three thin metal pieces with screw ports to secure the DS3820AISA1 in place. Each section of the DS3820AISA1 is labeled with a corresponding letter and number combination based on the part. The DS3820AISA1 has six small blue masculine terminal ports with ten metal prongs in each port. These masculine terminal ports are used to connect with other circuit boards.

** TurbineIndustrial suggests referring to the original manufacturer's manual for all safety and installation methods. Technical support for the DS3820AISA1 was initially provided by General Electric.

For additional information call TurbineIndustrial’s trusted staff.