Description

The DS3800NDCA is made by GE for their Speedtronic Mark IV line.One elongated edge of the DS3800NDCA is labeled A through J (skipping the letter I). Theother elongated edge has the part number (DS3800NDCA) written along it. The DS3800NDCA also has two light-colored clasps on a short edge and two rivet openings on the opposite short edge. These parts are to secure the DS3800NDCA in position. The DS3800NDCA can be fastened to another circuit board or on its own depending on how your current system is set up. The DS3800NDCA has a large feminine terminal. The DS3800NDCA has thirty-five resistors. Each resistor has different color bands. The DS3800NDCA also has eight LEDs (light emitting diodes). These diodes illuminate as an electrical current passes through them. Three LEDs are red, while the other five LEDs are yellow. The DS3800NDCA has ten Variable Resistors or Potentiometers in one part and another five Variable Resistors or Potentiometers on the far edge. The Variable Resistors are all changeable by a tiny dial on the top of each resistor. The Variable Resistors do not depend on each other they can all be attuned separately. The DS3800NDCA has two thin silver walls along the elongated edges of the board (one on either side). The DS3800NDCA also features over forty-five petite posts each with a flat head screw on top. These towers permit for other components such as capacitors, resistors, LEDs, diodes, etc. to be attached as needed.

Call TurbineIndustrial for a quote.